EasyManua.ls Logo

Falcon Dominator Plus G3845 User Manual

Falcon Dominator Plus G3845
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User, installation and servicing instructions
GAS TWIN PAN FRYER
G3845, G3845F
Read these instructions before use
T101003
Rev No: 2
Published: 20/01/2019
DATE PURCHASED:
MODEL NUMBER:
SERIAL NUMBER:
DEALER:
SERVICE PROVIDER:
Question and Answer IconNeed help?

Do you have a question about the Falcon Dominator Plus G3845 and is the answer not in the manual?

Falcon Dominator Plus G3845 Specifications

General IconGeneral
BrandFalcon
ModelDominator Plus G3845
CategoryFryer
LanguageEnglish

Summary

Appliance Information

Operation

Component Parts

Identifies the primary physical components of the fryer unit.

Controls

Details the function and location of all control knobs and buttons.

Using the Appliance

Provides step-by-step instructions for operating the fryer safely and effectively.

Filtration

Explains the process and system for filtering cooking oil.

Safety Reset

Guides users on how to reset the safety thermostat and troubleshoot related issues.

Cleaning and Maintenance

Specification

Appliance Weight Table

Lists the unit and packed weight for different appliance models.

Electrical Data Table

Provides electrical specifications including current and power ratings.

Injector Sizes & Pressure Table

Details injector sizes and gas pressure requirements for different gas types.

Heat Input Table

Specifies the heat input values (kW, Btu/hr) for the appliance.

Dimensions and Connection Locations

Installation

Siting and Clearances

Specifies the required space and clearances around the appliance for safe installation.

Ventilation

Outlines the ventilation requirements for proper operation and safety.

Assembly

Details how to position, level, and assemble the appliance.

Gas Supply and Connection

Specifies requirements for connecting the appliance to the gas supply system.

Electric Supply and Connection

Details the electrical connection requirements, cord type, and safety.

Commissioning

Guides users through the final checks and setup procedures after installation.

Conversion

Gas Conversion Check List

Lists checks and requirements for converting the appliance between gas types.

Servicing

Front Fascia Access

Explains how to remove the front fascia for accessing test points.

Inner Control Panel Access

Details how to remove the inner control panel to access components.

Piezo Igniter, Safety Thermostat, Pump Switch

Instructions for accessing and potentially removing these specific components.

Gas Valve Access

Explains how to gain access to the gas valve for maintenance.

Safety Thermostat Phial Replacement

Step-by-step guide for removing and replacing the safety thermostat phial.

Operating Thermostat Phial Replacement

Instructions for removing and replacing the operating thermostat phial.

Pilot Assembly Servicing

Details how to remove the pilot assembly for servicing.

Burner Servicing

Instructions for accessing and removing the burner components.

Governor Adjustment

Explains how to adjust the governor for natural gas appliances.

Rear Electrics Box Access

Instructions for accessing the rear electrics box for maintenance.

Pump Removal

Details the procedure for removing the pump.

Pump Timer Setting

Specifies how to set the pump timer functions.

Circuit Diagrams

Provides electrical circuit diagrams for appliance models.

Wiring Diagrams

Illustrates the wiring connections for appliance models.

Accessories

Splashguard Installation

Instructions for fitting the splashguard accessory.

Fault Finding

Spare Parts

Service Information

Related product manuals