Falcon FLO - E-Bike Riding Method; Start Up Procedure

Page 10
Riding method
Be familiar with all the component parts of the e-bike and test all the electric functions before riding. Make sure all the
componentsofthebicycleareingoodcondition,thebatteryischargedandthetyresarecorrectlyinated.Thedetail
operation as following:
START UP:
Your bike is supplied with a set of keys which are to lock your battery in place. They are not ignition keys. Once the
battery is in place, turn the key to lock and remove when in use to avoid them falling out/being lost. To turn your electric
motor on, press the power button on your handlebar display (Fig.1). Ensure the battery cover is positioned correctly
before use (Fig.2).
RIDING METHOD
Fig.1 Fig.2
Charge the battery before your
rstride.
Note: When charging is
completed, please cover the plug
to avoid the water intake of the
charging port.
Press M button
for 3 seconds to
power up