If the setting is failed, please find
below solution or contact us by
Email: support@faleemi.com
Skype: support@faleemi.com
Phone: 213 293 3560
EST: 6am~10am, 8pm-11pm
PST: 6am~7am, 5pm-12pm
When you call us, please wait some more
When you call us, please wait some more
moment until we pick up the phone.
moment until we pick up the phone.
9. Connect to WiFi.
You will see it says the camera is Online.
You will see it says the camera is Online.
10.You will see it says the camera is Online.
Congratulations! Your camera is all set up.
Click on the image to enjoy viewing and
controlling it now.
13
14
When the camera receives the WiFi
When the camera receives the WiFi
signal, it will sound with 2 beeps.
signal, it will sound with 2 beeps.
When the connection is successful, it
When the connection is successful, it
will take you to the camera page.
will take you to the camera page.
1. If you see the blue light goes off instead of
solid on, the WiFi password you just input
may be wrong. Please reset the camera
(instructions in
Page 30) and do the setup
again.
2. If your WiFi password was correct but still
failed.
(a). Please make sure your phone is connected
to your 2.4GHz WiFi (not 5GHz WiFi) before
doing the setup.
(b). Your 2.4GHz WiFi name (SSID) must be
different from your 5.0GHz one.
(c). Please sure your WiFi name and password
do not have the special characters " & " and
" ' "(apostrophe).
If you are not sure, please go to your router
settings to find this out.
If you don’t know how to go to your router
settings, please visit our website
www.faleemi.com/blocks/router to find
the instructions.
Troubleshooting
For more FAQ information, please visit
https://www.faleemi.com/faq/
Or contact us ：
support@faleemi.com
1. To ensure the security of your camera,
1. To ensure the security of your camera,
you
are suggested changing the default password.
are suggested changing the default password.
Please refer to the instruction in
Please refer to the instruction in
Page 28
2. You can relocate the camera now. Please just
2. You can relocate the camera now. Please just
unplug it and move it to the new location and
unplug it and move it to the new location and
plug it in, the camera will connect to your WiFi
plug it in, the camera will connect to your WiFi
automatically, no need to set it up again.
automatically, no need to set it up again.
* But please make sure the new location will be
* But please make sure the new location will be
not far from your router.
not far from your router.
Congratulations!
Your camera is connected now
Your camera is connected now
Setup Option C
Setup Option C
Model: FSC882
Quick Start Guide
1080P Pan/Tilt Wireless Network Camera
To Next Page
Loading...
