To Next PageTo Next Page
Need help?Do you have a question about the FALEEMI FSC881 and is the answer not in the manual?
General| Resolution | 1080p |
|---|---|
| Night Vision | Yes |
| Two-Way Audio | Yes |
| Motion Detection | Yes |
| Lens | 3.6mm |
| Weatherproof | IP66 |
| Power Supply | DC 5V/1A |
| Storage | MicroSD card |
| Operating Temperature | -4°F to 122°F |
| Storage Temperature | -4°F to 140°F |
Lists all components provided with the Faleemi IP Camera FSC881.
Identifies the camera's physical ports and components like IR LEDs, lens, and antenna.
Explains the meaning of various LED light statuses and their corresponding device states.
Instructs users to download the Faleemi app from app stores for setup.
Connect the camera to power and your router via Ethernet cable.
Open the Faleemi app and begin the camera addition process.
Choose the wired mode for connecting the camera.
Click 'Next' to move to the camera setup interface.
Scan the QR code on the camera to identify it.
Assign a name to your camera for easy identification.
Confirm connection and choose to set up WiFi.
Choose your WiFi network and enter its password.
Acknowledge the successful WiFi connection and remove the Ethernet cable.
Click on the camera image to start viewing and controlling it.
Explains the various buttons and functions available in the live video interface.
Details how to use the microphone and the 'Hold Talk' feature.
Shows how to control camera movement (pan, tilt) and zoom using the mobile app.
Ensure the second phone is connected to the same WiFi network as the camera.
Download and open the Faleemi App on the second phone and add the camera.
Utilize the LAN Search function to find and connect the camera.
Provide the camera's name and password to complete the connection.
Navigate to the Advanced Settings section via the app.
Configure the camera to record video continuously to a memory card.
Instructions on how to format the Micro SD card before use.
Adjust record time limits and video bitrate for memory card recording.
Enable motion detection and save triggered video clips to the memory card.
Access and play back recorded video files stored on the memory card.
Steps to change the camera's default password for enhanced security.
Guide to viewing multiple cameras simultaneously in the app.
How to adjust the video resolution for the camera stream.
Instructions on how to flip the video stream if the camera is mounted upside down.
Procedure to reset the camera to its original factory default settings.
Information on configuring email alerts for motion detection events.
Guides for connecting the camera to a computer using Faleemi Plus.
