Faller Car System Digital 3.0 - Page 38

38
Programming the vehicle’s functions
EN
CV Description Value Range
»31« Switching magnetic sensor off after
detection of field green - in 0.1 s steps
5 0-255
»32« Switching magnetic sensor off after
detection of field red - in 0.1 s steps
20 0-255
»33« Stop lights: Responsiveness as driving
speed difference
15 0-255
»34« Stop lights: Time of persistence at
driving speed 0 - in 10 ms steps
30 0-255
»35« Horn sound Period 1 31 0-255
»36« Horn sound Period 2 41 0-255
»37« Duration of horn sound
(in 100 ms steps)
5 0-255
»38« Duration of the flick of headlamp
beam (in 100 ms steps)
5 0-255
»49« Configuration
Bit 0 = Motor regulation switched off
(1 = off, 0 = on)
Bit 1 = Short-circuiting motor when
braking above a stop section
(1 = Short-circuiting motor,
0 = no motor short-circuit)
Bit 2 = Magnet control switched off,
only DCC control
(1 = only DCC,
0 = Magnet control & DCC)
Bit 3 = DCC radio control switched
off
Bit 4 = Motor’s directions of rotation
(0 = both directions of rota
tion possible,
1 = only one direction of rotation)
(CV29 Bit 0 is active!)
2 0-255