45
How to deal with problems
EN
Fault description Source Remedy
Vehicle stops
with flashing
headlights
Radio contact bet-
ween vehicle and
master has been
interrupted
X
Re-establish radio contact
between vehicle and mas-
ter, if need be check the
master’s antenna.
When switching
the master on
subsequently,
the vehicle is
not identified by
the software
More than five
minutes have
passed between
switching on the
vehicle and swit-
ching on the mas-
ter subsequently,
vehicle has swit-
ched off radio and
ultrasonic signals
on its own and
now operates as an
“analog vehicle”
X
Switch the vehicle off and
on again.
Vehicle stops
within the ins-
tallation with
alternating turn
signals (alterna-
tely left/right)
Battery in the
vehicle nearly
empty
X
Recharge the vehicle using
the Processor-controlled
charging unit.
Vehicle does not
maintain its con-
tact with con-
tact wire.
Steering rod bent
Roadway too irre-
gular
Tyres of front axle
come in contact
with vehicle’s body
X
Straighten the steering rod
so that it lies flat onto the
roadway.
X
Improve roadway.
X
Use a modeller’s knife to
ensure sufficient clearance,
generally you merely need
to chamfer the vehicle’s
mudguard slightly on the
interior side.