46
How to deal with problems
EN
Fault description Source Remedy
Vehicle does not
stop at a stop
point.
Installation of stop
point not correct
Wrong polarity for
the stop point
Voltage too weak
at the stop point
X
Check the installation of
stop point and improve it.
X
To make sure that a stop
point reliably stops a
vehicle, the north pole
of its coil must show
upwards. Whenever the
steering slider of a vehicle
is repelled by a stop point
that is switched on, its
polarity is correct.
X
To be able to operate pro-
perly, a stop point has to
be supplied with 16 V rec-
tified alternating voltage.
Vehicle comes
to a stop at a
place where it
should only slow
down.
Wrong polarity for
the stop point
X
To make sure that a stop
point reliably slows down
a vehicle, the south pole
of its coil must show
upwards. Whenever the
steering slider of a vehicle
is attracted by a stop point
that is switched on, its
polarity is correct.
Tab. 3: How to deal with problems
To Next Page
Loading...