FAME MS 5002 DSP - Page 41

41
DEUTSCH ENGLISH
Listing of functions and their default settings
1. Mono: off
2. Input Delay: off, set to 0 meter
3. Input EQ: E1-E7 off, set to Bell, gain: 0dB, Q: 1.0
4. Input 1 routed to Channel A, DSC2.4: Channel A and Channel C
5. Input 2 routed to Channel B, DSC2.4: Channel B and Channel D
6. Mute: off
7. Channel Gain: 0dB
8. Channel Phase 180: off
9. Xover HPF: off, set to Butterworth 18dB/oct.
10. Xover LPF: off, set to Butterworth 18dB/oct.
11. Channel EQ: off, E1-E5 off, set to Bell, gain: 0dB, Q: 1.0
12. Limiter: off, Treshold: 0dB, Attack: 5ms, Release: 20ms, LowCut: off
13: Driver Delay: off, set to 0 meter
14. Channel Link: off
15. Xover Link: off
16. Presets: 1-20 empty
17. Factory Presets: 1-20 empty
18. Device ID: 0, -no name-