1. Drill the two 1/4” holes in wall and use the M6 plastic
anchor pushed into the holes. Install the control
bracket with two #3- 1” self tap screws. Push the four
plastic plug to cover the screw holes. (Including in the
control packaging). (Figure 1)
How to Install Your Remote Control (Option #3)
Figure 1
Copyright 2019 Fanimation
2019/11 V.01
10983 Bennett Parkway
Zionsville, IN 46077
(888) 567-2055 • FAX (866) 482-5215
Outside U.S. call (317) 733-4113
WWW.FANIMATION.COM
To Next Page
Loading...
