Fantec DB-228U3e User Manual

FANTEC DB-228U3e
2.5” Aluminum enclosure
USER MANUAL
.
FANTEC DB-228U3e
2,5” Aluminium Gehäuse
Benutzerhandbuch
Packungsinhalt: FANTEC DB-228U3e, Y-USB Kabel, eSATA Kabel,
Schrauben, CD, Backup Software, Tasche
Vis, CD, logiciels de sauvegarde, poche
Einbauanleitung
Schritt1: Öffnen Sie das Gehäuse.
Ziehen Sie die Elektronikplatine
aus dem Gehäuse heraus
Schritt 2: Legen Sie die Festplatte auf
die Elektronikplatine u nd schieben
Sie diese in Richtung der Platine bis
der SATA-Stecker der Festplatte fest
mit der SATA-Buchse verbunden ist.
Schritt 3: Verschrauben Sie die
Festplatte mit der Platine.
Schritt 4: Schließen Sie das
Gehäuse und fixieren Sie das
Gehäuse mit den beiliegenden
schrauben.
Der Festplatteneinbau
ist abgeschlossen.
R
2.5” boîtier aluminium
FANTEC DB-228U3e
MANUEL DE L'UTILISATEU
Contenu de l'emballage: FANTEC DB-228U3e, Y-câble USB, câble eSATA
Guide d'installation du matériel
ETAPE 1 : Ouvrez le boîtier.
Vous pourrez observer la
structure interne du boîtier.
ETAPE 2 : Poussez le disque dur
vers la carte électronique et vérifiez
que le connecteur SATA est
correctement branché.
ETAPE 3 : Fixez-les avec le disque
ETAPE 4 : Fermer le couvercle et vissez.
L 'o p é ra tio n
d 'a s s e m b la g e e s t t e rm i n é e .
Package contents: FANTEC DB-228U3e, Y-USB Cable 3.0, eSATA Cable,
Screws, CD, Backup software, bag
Hardware Installation Guide
STEP1: Open the enclosure.
You will see the internal
tructure of the enclosure.
STEP2: Push the HDD to wards
the electronic board and make
sure the SATA connector is well
connected.
STEP3: Fix the HDD on the
electric card.
STEP4: Fix the enclosure and
screw the screws on the side.
The assembling process
is now accomplished.
s
dur de la carte de circuits.

Fantec DB-228U3e Specifications

General

Brand	Fantec
Model	DB-228U3e
Category	Enclosure
Language	English

Summary

Hardware Installation Guide

Open the Enclosure

Open the enclosure to view its internal structure.

Connect HDD to Board

Connect the HDD to the electronic board, ensuring the SATA connector is seated.

Secure HDD

Fix the HDD securely onto the electric board.

Close and Secure Enclosure

Close the enclosure and fasten it with the provided screws.

eSATA Mode Operation

Power Requirement for eSATA

For eSATA use, connect the USB cable for power; use the second USB plug if needed.

HDD Formatting Guide

Access Disk Management

Access 'Disk Management' by right-clicking 'My Computer' and selecting 'Manage'.

Identify Unallocated Drive

Select 'Disk Management' to view the external HDD as 'Unallocated'.

Create New Partition

Create a new partition by right-clicking the 'Unallocated' space.

Use Partition Wizard

Complete the partition creation process using the New Partition Wizard.

Verify New Volume

After partitioning, the HDD will be recognized as a 'New Volume'.

Confirm Volume in My Computer

Confirm the new volume appears in 'My Computer' after successful partitioning.