To Next PageTo Next Page
Need help?Do you have a question about the Fantec mobiRAID X2 and is the answer not in the manual?
Lists the items included in the retail box of the FANTEC mobiRAID X2.
Explains the meaning of steady blue, blinking blue, and off states for the LEDs.
Details the USB 3.0, Reset button, RAID switch, and DC IN ports.
Remove the aluminium housing from the inner tray.
Assemble HDD 2 and HDD 1 into the inner tray, and label them for identification.
Fix the HDDs with the shorter screws at the upper side of the inner tray.
Put the aluminium housing back and fix it with longer screws.
Explains the 3 different RAID modes (JBOD, RAID0, RAID1) and their implications.
Instructions to set up and initialize the device in JBOD mode.
Instructions to set up and initialize the device in RAID 0 mode.
Instructions to set up and initialize the device in RAID 1 mode.
Important considerations regarding RAID mode changes, power, and HDD compatibility.
Process for rebuilding data in RAID 1 mode after a disk failure.
How to access data if a disk crashes in JBOD, RAID 1, or RAID 0 modes.
Troubleshooting steps if the PC does not recognize the FANTEC mobiRAID X2.
Lists the items included in the retail box of the FANTEC mobiRAID X2.
Explains the meaning of steady blue, blinking blue, and off states for the LEDs.
Details the USB 3.0, Reset button, RAID switch, and DC IN ports.
Remove the aluminium housing from the inner tray.
Assemble HDD 2 and HDD 1 into the inner tray, and label them for identification.
Fix the HDDs with the shorter screws at the upper side of the inner tray.
Put the aluminium housing back and fix it with longer screws.
Explains the 3 different RAID modes (JBOD, RAID0, RAID1) and their implications.
Instructions to set up and initialize the device in JBOD mode.
Instructions to set up and initialize the device in RAID 0 mode.
Instructions to set up and initialize the device in RAID 1 mode.
Important considerations regarding RAID mode changes, power, and HDD compatibility.
Process for rebuilding data in RAID 1 mode after a disk failure.
How to access data if a disk crashes in JBOD, RAID 1, or RAID 0 modes.
Troubleshooting steps if the PC does not recognize the FANTEC mobiRAID X2.
General| Model | mobiRAID X2 |
|---|---|
| Manufacturer | Fantec |
| Category | Enclosure |
| Drive Bays | 2 |
| Supported storage drive interfaces | SATA |
| Supported RAID Levels | RAID 0, RAID 1 |
| Interface | USB 3.0 |
| USB version | 3.0 |
| Power Supply | External Power Adapter |
| Material | Aluminum |
| Colour | Black |
| Operating System Compatibility | Windows, macOS, Linux |
| Supported Drive Types | HDD/SSD |
| Supported HDD size | 2.5 inch |
| RAID Modes | RAID 0, RAID 1, JBOD |
| Type | External |
