EasyManua.ls Logo

Fantech PB270-2 User Manual

Fantech PB270-2
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PB Series
IMPORTANT: PLEASE READ THIS MANUAL BEFORE INSTALLING UNIT
PREMIUM BATH FANS
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
WARNINGS:
DO NOT CONNECT POWER SUPPLY until unit is completely installed.
Make sure electrical service to the fan and light is locked in“OFF” position.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS –
OBSERVE THE FOLLOWING:
a. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact your
manufacturer's representative.
b. CAUTION: Before installation, servicing or cleaning unit, switch power off at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device, such as tag, to the service panel.
c. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable
codes and standards. This unit is only for use in non-fire-rated installations.
d. When cutting or drilling into wall and ceiling, do not damage electrical wiring and other hidden utilities.
e. NEVER place a switch where it can be reached from a tub or shower.
f. If this unit is installed over a tub or shower, it must be connected to a GFCI (Ground Fault Circuit Interrupter) –
protected branch circuit.
g. The combustion airflow needed for safe operation of fuel burning equipment may be affected by this unit’s
operation. Follow the heating equipment manufacturers guidelines and safety standards such as those
published by the National Fire Protection association (NFPA), the American Society of Heating, Refrigeration,
and Air Conditioning Engineers (ASHRAE) and the local code authorities.
h. Exhaust fans must always be vented to the outdoors.
CAUTION: "For General Ventilation Use Only. Do Not Use To Exhaust Hazardous Or Explosive Material and Vapors."
CAUTION: BULB USED IN FLUORESCENT MODELS NOT DIMMABLE
CAUTION: USE ONLY FANTECH (MODEL PBB14) FLUORESCENT BULBS AND
PAR16/MR16 GU10 50W MAX. HALOGEN BULBS (FANTECH MODEL PBB50).
Single Grille Units
4" Duct
PB110
PB110F
PB110H
PB190
PB270-2
PB270F-2
PB270H-2
PB270FV-2
PB270HV-2
PB370-2
Single and Dual Grille Units 6" Duct
SEVEN-YEAR
WARRANTY

Other manuals for Fantech PB270-2

Question and Answer IconNeed help?

Do you have a question about the Fantech PB270-2 and is the answer not in the manual?

Fantech PB270-2 Specifications

General IconGeneral
ModelPB270-2
Motor Speed1300 RPM
Frequency50Hz
MaterialPlastic
Warranty1 Year
CategoryFan
Voltage220V

Summary

General Safety Warnings

Pre-Installation Safety

Crucial warnings to prevent fire, electric shock, or injury during installation.

Installation and Usage Precautions

Guidelines for safe installation, electrical connections, and operation.

Installing Fan and Bracket

Electrical Connection

Wiring the Fan

Steps for connecting incoming electrical service to the fan's terminal strip.

Troubleshooting and Maintenance

Troubleshooting Fan Operation

Steps to diagnose and resolve issues if the fan fails to operate.

Seven (7) Year Warranty

Warranty Coverage and Return Process

Details on Fantech's repair/replacement policy and RMA procedures.

Warranty Limitations and Exclusions

Conditions not covered by warranty, including improper installation or misuse.

Related product manuals