Need help?Do you have a question about the Fantek T101D and is the answer not in the manual?
General| Brand | Fantek |
|---|---|
| Model | T101D |
| Category | Lifting Systems |
| Language | English |
Keep hands away from moving parts and ensure proper leveling before lifting.
Do not use on tilted surfaces; place on stable ground and avoid using ladders on the tower.
Verify load limits and ensure structural integrity during operation.
Proper lubrication of mechanisms and securing loads to prevent accidental falls.
Maintain safe distance from power lines; towers are not electrically insulated.
Do not use as welding mass; avoid banner support in wind conditions.
Fix and secure the legs stabilizers to the base.
Level the tower, ensuring wheels do not contact the ground.
Unlock the security system to initiate lifting operations.
Use winch to lift sections, locking/unlocking security systems between stages.
Ensure all security systems are locked after each section is lifted.
To lower, tighten cable, unlock first security system, and operate winch.
Table showing compatibility between truss types and tower accessories.
Mentions DIN 56950, DGUV V17/18, and EU Machinery Directive 2006/42/EC.
How Dynsys limits loads, provides alerts, and acts as preventive maintenance.
Inspect cable condition regularly; replace shabby or broken cables immediately with original parts.
Using forklifts with the ATCTT106 accessory and safe handling practices.
Securing towers with ratchets to prevent movement during road transport.
How the norm ensures safety in design, materials, and responsible use.
Lists the maximum load capacity for each specific model.
Spaces for recording annual and UVV (yearly) tests and inspections.
Manufacturer strongly recommends all tests for damage prevention and optimal operation.
To Next Page
