EasyManua.ls Logo

Fantic XX 250 - Page 65

Fantic XX 250
153 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 Motore1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION2-Strokes - Edition 01 / 2023
64
Item
After break-in Every race
(about 2.5
hours)
Every third
(about 7.5
hours)
Every fifth
(about 12.5
hours)
As required
Remarks
– Check fluid level and leakage √√
– Retighten brake disc bolts,
caliper bolts, master cylinder
bolts and union bolts
√√
– Replace pads √
– Replace brake fluid √ Every one year.
Front forks
– Inspect and adjust √√
– Replace oil √√
– Replace oil seal √
– Replace dust seal √
Rear shock absorber
– Inspect and adjust √√
– Lubricate √
√
(after rain
ride)
Molybdenum disulfide
grease.
– Retighten √√
Drive chain guide and rollers
– Inspect √√
Check for wear or damage
and replace if necessary.
Swingarm
– Inspect, lubricate and
retighten
√√
Molybdenum disulfide
grease.
Relay arm, connecting rod
– Inspect,
lubricate
and retighten
√√
Molybdenum disulfide
grease.
Steering head
– Inspect free play and retighten √√
– Clean and lubricate √ Lithium base grease.
– Replace bearing √
Tire, wheels
– Inspect air pressure, wheel
run-out, tire wear and spoke
looseness
√√
– Retighten sprocket bolt √√
– Inspect bearings √
– Replace bearings √
– Lubricate √ Lithium base grease.
Throttle, control cable
– Check routing and connection √√
– Lubricate √√ Cable lube or motor oil.

Table of Contents