FANUC Power Mate Series - User Manual

1
FANUC LTD.
Power Mate Series
Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device............................................................................................7
3 Example of Communication Setting.................................................................................8
4 Setup Items....................................................................................................................11
5 Cable Diagram ...............................................................................................................14
6 Supported Device...........................................................................................................22
7 Device Code and Address Code....................................................................................26
8 Error Messages..............................................................................................................27

Summary

System Configuration

Connection Configuration

Details the 1:1 connection configuration between Display and External Device.

IPC COM Port

Explains usable COM ports for IPC connections and related DIP switch settings.

Selection of External Device

Example of Communication Setting

Setting Example 1

Details GP-Pro EX and External Device communication settings for Example 1.

Setting Example 2

Details GP-Pro EX communication settings for Example 2.

Settings of External Device

Explains how to set the speed on the External Device.

Setup Items

Setup Items in GP-Pro EX

Lists and describes communication setup items configured within GP-Pro EX.

Setup Items in Off-Line Mode

Details communication setup items configured in the Display's off-line mode.

Option

Explains the RI/VCC setting for RS232C SIO type.

Cable Diagrams

Cable Diagram 1

Shows cabling for GP, ST, IPC, and PC/AT models using various adapters.

Cable Diagram 2

Details cabling for GP, ST, IPC, and PC/AT using a converting cable.

Cable Diagram 3

Details cabling for GP, ST, IPC, and PC/AT using own cable for RS232C.

Cable Diagram 4

Shows cabling for GP, ST, IPC models using online adapters.

Supported Device

Fanuc Power Mate Series

Lists supported device addresses for Fanuc Power Mate Series.

Fanuc Power Mate i Series

Lists supported device addresses for Fanuc Power Mate i Series.

Fanuc Series (16;18;21 Models)

Lists supported device addresses for Fanuc 16/18/21 Series.

Fanuc Series (30 i;31 i;32 i Models)

Lists supported device addresses for Fanuc 30i/31i/32i Series.

Device Code and Address Code

Error Messages

Error Message Peculiar to External Device

Lists error messages specific to the External Device.

FANUC Power Mate Series Specifications

General

Control Type	CNC
Program Memory	Varies by model
Interpolation	Linear, Circular
Programming Method	G-code
Operating Temperature	0 to 45°C
Display	LCD
Interface	RS-232C, Ethernet
Memory Capacity	Varies by model
Humidity	20 to 80% (non-condensing)