B-82604EN/01 OPERATION 5.SETTING UP CIMPLICITY HMI
- 13 -
5.1 CREATING A NEW PROJECT
Before CIMPLICITY HMI can be connected to robot controller over
an Ethernet, Series 90 Ethernet must be specified as the protocol
when a new project is created.
1. Open the File menu, and select New, then Project.
The New Project dialog box appears.
Set the following:
Project Name and New Subdirectory : Arbitray
Series 90 Ethernet in Protocols : Check this item.
2. Click Create.
Project Properties appears.
3. Click OK.
To Next Page
Loading...