FANUC R-J3iB - 5.2 REGISTERING A PORT

B-82604EN/01 OPERATION 5.SETTING UP CIMPLICITY HMI
- 15 -
5.2 REGISTERING A PORT
Next, you will register a port.
1. Double-click the Equipment folder on the tree.
The Equipment folder opens.
2. Double-click Ports.
The New Port dialog box appears.
Set the following:
Protocol : S90_TCPIP
Port : Arbitray (TCPIP0 in this case)
3. Click OK.
The Port Properties dialog box appears.