1. Installation
The first step: the device with metal strips (user-owned) fixed in the installation location.
The second step: connect the function key, speaker, microphone and other peripheral devices to the
corresponding port. (metal shell with thick wires connected to the device grounding screw.)
The third step: plug the network cable and power, the device light flashes on behalf of the power
2. Searching device
Method 1:
Download address: http://download.fanvil.com/tool/iDoorPhoneNetworkScanner.exe
Open the iDoorPhone Network Scanner. Press the Refresh button to search the device and find the
IP address.
Method 2:
Connect the speaker, by pressing the volume down key for 3 seconds
(after 30 seconds after power on),the device automatically voice broadcast the machine’s IP address.
Method 3:
Long press the volume up key for 3 seconds, the speaker issued a rapid beep, and then quickly press the
Volume up key three times, beep stopped. Wait 10 seconds, successfully switch to dynamic IP after the
system automatically voice broadcast IP address. Switching again will become a fixed IP address.
Default DHCP
Enabled by default Static IP address 192.168.1.128
Voice broadcast IP
address
Hold the volume down
key for 3 seconds
Default Web port 80
Quick installation Guide
PA3
connection is normal.
⑮