FAR Barracuda - Engine Switch and AC Protector; Controls Explanation

GB
ENGINE SWITCH
The engine switch controls the ignition system.
1-
«ON»
Ignition circuit is switched on.
The engine can be started.
2-
«STOP»
Ignition circuit is switched off.
The engine will not run.
AC PROTECTOR
The AC protector turns off automatically when the load exceeds the generator rated output if
the AC protector turns off. if it turns off again, consult your FARGROUP leader.
N.B: Press to reset the AC protector.
© FAR GROUP EUROPE 2004