Turn the supply cock lever to «OFF»
Remove the tray from the fuel cock and the seal
Clean the tray using a solvent and dry it
Check the seal and replace it if it is damaged
eassemble the seal, tray and plate.
1- Remove the fuel cap tank and lter.
2- Clean the lter with solvent. If damaged, replace.
3- Wipe lter and insert it.
Do not wring out the element. This could cause it to lear. The engine should
never run without the element; excessive piston and cylinder wear may result.
Never use solvent while smoking or in the vicinity of an open ame.
Never use or be near the fuel and solvent while smoking or in the vicinity of an
open ame. be sure the fuel cock cup is tightened securely.
be sure the fuel cock cap is tightened securely.
To Next Page
Loading...