FAR Barracuda - Page 35

To Next Page

To Previous Page

ENGINE

1- Remove the Saprk plug, about one tablespoon of two-stroke oil into the spark plug.

recoil star the engine by turning over several times (with ignition off) to coat the cilynders

walls with oil.

2- Pull the recoil starter until you feel compression. Then stop pulling. (This prevents the

cylinder and valaves from rusting)

3- Clean exterior of the generator and apply a rust inhibitor.

4- Store the generator in a dry, well- ventilated place, with th ecover placed over it.

5- The generator must remain in a vertical position when stored, carried and operated .