EasyManua.ls Logo

FAR LV12C47MI17IX - Prior Using for the First Time; Initial Setup: Water Softener and Salt; Initial Setup: Rinse Aid and Detergent

FAR LV12C47MI17IX
76 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISHENGLISH
GB-13GB-12
4. PRIOR USING FOR THE FIRST TIME
1.
Upper Basket
2. Inner pipe
3. Lower Basket
4. Salt Container
5.
6.
Cup Shelf
7. Spray arms
8. Filter assembly
9. Inlet pipe
connector
10. Drain pipe
starting up or not;
Note: Half-load function and extra drying
function only choose one at the same time
Dishwasher Features
Front view Back View
Before using your dishwasher for the rst time:
A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full ll
the salt container with water
C. Fill the rinse aid dispenser
D. Fill in detergent
A. Water Softener
e water softener must be set manually, using
the water hardness dial.
e water softener is designed to remove
minerals and salts from the water, which
would have a detrimental or adverse eect on
the operation of the appliance.
e higher the content of these minerals and
salts, the harder your water is.
e softener should be adjusted according to
the hardness of the water in your area. Your
local Water Authority can advise you on the
hardness of the water in your area.
Adjusting Salt Consumption
e dishwasher is designed to allow for
adjustment in the amount of salt consumed
based on the hardness of the water used. is is

Table of Contents

Related product manuals