Tips :
• Only use liquid rinse aid in the dishwasher.
• Do not overfill the rinse aid dispenser.
• Wipe off the spilled rinse aid around the dispenser.
Adjust the rinse aid dispenser
The dispenser has 9 adjustment levels. The rinse aid dispenser has been set to
level d3 when it leaves factory. You may check and change this seng using
the buons on the control panel.
1. Ensure that the dishwasher has been turned off.
2. Press "Intensive" and "Machine Care" simultaneously to enter the
operaon seng procedure, and press "Intensive" to check the current
sengs.
3. Press"Machine Care" to change the sengs of rinse aid dispenser. Level d0
to d8 can be gradually set by pressing this buon.
4. Aer compleng the required rinse aid dispenser sengs, press the
"On/Off" buon to shut down and save the sengs.
Tips :
• If you use hard water and find calcium accumulaon on the tableware,
please set the level to high.
• Too low level of the rinse aid dispenser will lead to spots and stripes on the
dishes and poor drying performance.
• Too high level will lead to foaming, resulng in poor washing effect.
Replenish the rinse aid
The refilling frequency of the dispenser depends on the frequency of
dishwashing and the rinse aid seng.
• When more rinse aid is required, the rinse aid icon will flash, unless the
rinse aid dispenser is set to level do.
GB-26
To Next Page
Loading...
Need help?
General
