LOADING INTO THE DISHWASHER
Please always follow the following instrucons in order to achieve effecve
washing effect.
• Loading the household dishwasher up to 13 sets will contribute to energy
and water savings on correct loading according to below instrucon.
• Remove large food parcles, including bones, from dishes before loading.
• Soak the dishes containing burnt food before pung them into the
dishwasher.
• Put deep pots or plates upside down.
• Ensure that all items do not touch each other.
• Tableware with excessive width should be placed at an angle so that the
water can flow out freely.
• The tableware cannot be placed with the mouth upward.
• Tableware with excessive height cannot be p Tableware with excessive
height cannot be placed in the corner of dish rack.
• Ensure that small items will not fall off the rack, so small items such as the
lid should be placed in the cutlery basket.
• The interior of small tableware is not easy to be sprayed and
cleaned,resulng in poor washing effect. It is not suggested to clean small
tableware in the dishwasher.
For washing the following cutlery/dishes
Are not suitable
• Cutlery with wooden, horn china or mother-of-pearl handles
• Plasc items that are not heat resistant
• Older cutlery with glued parts that are not temperature resistant
• Bonded cutlery items or dishes
• Pewter or copper items
• Crystal glass
• Steel items subject to rusng
• Wooden plaers
• Items made from synthec fibres
GB-31