FAR LV13C46S22W - Control Panel

CONTROL PANEL
On/Off Buon
• Turn on/off the power supply.
• Press this buon to cut off the power supply aer the program is
completed.
Start/Pause Buon
• Press this buon to start the operaon.
• Press this buon to pause during operaon, and press it again to connue
the operaon.
Program Buon
• Press this buon to select the program you want.
Delay Timer Buon
• Press this buon to set the delay me.This funcon can delay the start me
of the program selected. Each me you press this buon,the delay me will
increase by one hour. The seng range of delay me is 1-24 hours,and the
single adjustment range is 1 hour. You may press it to cancel aer 24 hours.
• During the delay me, you may cancel the delay me by opening the door
and long pressing the "Delay mer" buon. At this me,it will return to the
state of no delay mer selected. The delay me shown on the panel is the
me when the program finishes.
Intensive Buon
• This oponal funcon is used to adjust the temperature and me to
achieve beer washing effect.
Machine Care Buon
• This funcon is used to clean the inside of the dishwasher and eliminate
residual dirt, odor, white spots and other dirt. You are not required to place
tableware in the machine when using this funcon.
5
6
5
6
GB-27
Universal