Middle spray arm cleaning
1. Pull the upper dish rack forward and ensure that spray holes are not
blocked by food parcles.
2. Before cleaning,rotate the nut at the boom of the spray arm
counterclockwise and pull it down to remove the middle spray arm.
3. Remove food parcles by flushing or shaking the spray arm.
4. Remove the food residue blocking the spray arm hole with a pin or any
sharp tool.
5. Clean the spray arm hole with running water aer removing the food
residue.
6. Reinstall the middle spray arm in place aer cleaning. Turn the nut
clockwise to ensure that the nut locks the spray arm to its original posion.
7. Aer assembly, check whether the spray arm rotates freely.
GB-40
To Next Page
Loading...
Need help?
General
