FAR POWER - How to Maintain Your Vacuum Cleaner; Washable Dust Cup Filter Maintenance; Washable Post-Motor Filter Maintenance; Brushroll Maintenance

ENGLISHENGLISH
GB-21GB-20
HOW TO MAINTAIN YOUR VACUUM CLEANER
!
Caution!
!
WARNING: Moving parts!
• Recharge cleaner after each use.
• Never operate vacuum cleaner without all
filters, filter screen and dust cup in proper
position.
Washable dust cup filter - clean frequently
1. Twist dust cup and remove.
2. Twist filter screen and remove.
3. Lift out foam filter and holder.
4. Separate foam filter from fiber filter by
pulling them apart.
5. Rinse and dry THOROUGHLY
6. Reassemble once completely dry
Washable post-motor filter – clean every
6months
1. Twist filter cover and remove.
2. Lift out post-motor filter.
3. Shake to remove dust.
4. Every 6 months, replace filter or rinse and
dry THOROUGHLY.
5. Reposition filter and cover and twist to ‘lock.’
Brushroll maintenance - clean frequently or
when brushroll indicator light turns red
• Place motorized floor nozzle upside down. Use
scissors or knife to cut strings and threads.