farmex BHT-1 User Manual

1
Owner’s Manual
BHT-1
Baler Hay Moisture Tester
Part No. 07150
Unpacking
1. The BHT-1 is comprised of a display module (A) with mounting bracket and
2 knobs, a 10 ft. power cable (B) with fuse, a 25 ft. shielded sensor cable
(C), and a moisture sensor assembly (D) with mounting hardware and drill-
ing template. The 2 sheet metal screws (j) for mounting the display module
bracket are packed with the moisture sensor assembly. Identify all parts
illustrated below in Figure 1 before beginning to install.
FIGURE 1
(A) (B)
(C)
(D)
Moisture Sensor
Assembly (D):
a. (2) Contact bolts
b. (1) Plate
c. (2) Sm. plastic bushings
d. (2) Lg. plastic washers
e. (6) Flat washers
f. (2) Lg. lock washers
g. (4) Lg. nuts
h. (2) Flathead bolts
i. (2) Sm. lock washers
j. (2) Sm. nuts
k. (2) Sheet metal screws
for bracket
l. Sensor cable
b
a
h
i j
k
c d e f g e
l e g

farmex BHT-1 Specifications

General

Category	Test Equipment
Model	BHT-1
Manufacturer	Farmex
Display	LCD
Power Source	9V battery
Moisture Range	8% to 35%
Accuracy	±0.5%

Summary

Unpacking

Installation of the Moisture Sensor

Conventional Square Baler Installation

Install the sensor on a conventional square baler using provided hardware.

Large Square Baler Installation

Add strap iron for extra protection when installing on large square balers.

Round Baler Installation

Install the sensor on the sidewall or tailgate of a round baler.

Installation of the Display Module

Operating Instructions

Moisture Button Operation

Use the Moisture button to turn on/off and display readings.

Backlighting Adjustment

Toggle the display backlight on or off using the Light button.

Calibration and Reset Procedure

Recalibrate the sensor to current conditions and understand readings.

Turning Off the Meter

Press the Moisture button to turn the meter off.

Testing and Variables

Testing Procedure and Information

Understand how the BHT-1 takes readings and general testing advice.

Variables Affecting Moisture Readings

Factors influencing hay moisture readings like field and harvest conditions.

Care and Maintenance

Troubleshooting and Warranty

Troubleshooting Common Issues

Solutions for common problems like no power or incorrect readings.

Product Warranty Details

Information on the manufacturer's warranty coverage and limitations.

Other Moisture Testers