2 column
electro-mechanical lift
Mod. Z41/3S
3
Thank you for choosing a Eurolift lift manufactured by Zavagli Santi srl. It is
the result of years of experience in the industry and of a careful design aimed at
eliminating or minimising any risk of injury to the operator.
While designing and building the lift, all the provisions of the Machinery
Directive and subsequent amendments were complied with.
WARNING!
This booklet is an integral part of the product.
Read the warnings and instructions contained in this booklet very
carefully as they provide important information regarding safety, use and
maintenance.
Keep this booklet carefully for future reference.
The descriptions, illustrations and characteristics indicated are not
binding.
The manufacturer reserves the right to make changes whenever deemed
appropriate.
WARNING!
It is forbidden to overload the lift beyond the limits allowed.
The lift must be installed, assembled and commissioned by qualified and
professionally trained staff.
This device must be used only for the purpose for which it was designed.
The lift in question was made to be used to lift cars and light commercial
vehicles with four wheels and a maximum weight of 3500 Kg.
Any other use is to be considered improper and therefore forbidden.
The manufacturer declines all liability for any damage caused by failure to
comply with these instructions.
To Next Page
Loading...