Fasep FZ41/3S - Compliance with Safety Regulations

To Next Page

To Previous Page

2 column

electro-mechanical lift

Mod. Z41/3S

COMPLIANCE WITH SAFETY REGULATIONS

The 2 column electro-mechanical lift Z41/3S complies with the following

standards:

 Directive 2006/42/EC (Machinery Safety)

 Directive 2014/30/EU and relative amendments (Electromagnetic compatibility)

 Directive 2014/35/EU and subsequent amendments (Low voltage)

For design and construction, the following standards and specifications were used:

 UNI EN-ISO 12100: 2010- Safety of machinery - General principles for design -

Risk assessment and risk reduction.

 UNI EN 1493: 2010 – Lifts for vehicles.

 IEC EN 60204-1: 2006 + A1:2010 - Safety of machinery - Electrical equipment

of machines.

 IEC EN 61000-6-1: 2007 – General rules - Immunity for residential, commercial

and light-industrial environments.

 IEC EN 61000-6-3: 2012 – General rules - Emissions for residential, commercial

and light-industrial environments

THIS INSTRUCTION MANUAL IS DRAWN UP IN THE MANUFACTURER’S

LANGUAGE AND IN OTHER COMMUNITY LANGUAGES. IN CASE OF

DISPUTES, FOR LEGAL PURPOSES, THE ITALIAN LANGUAGE VERSION

IS EXCLUSIVELY APPLICABLE. THE MANUFACTURER DECLINES ALL

LIABILITY FOR DIRECT AND/OR INDIRECT DAMAGES CAUSED BY

SUBSTANDARD TRANSLATION OR BY INCORRECT INTERPRETATION

OF THE SAME TEXT.