Fastcorp DIVI User Manual

Fastcorp, LLC
DIVI Setup and Users Guide
Page 1 of 62 Rev 6
Thank you for purchasing a FASTCORP DIVI merchandiser. This guide will cover safety information and setup of
your machine for the first time. Please observe all of the safety precautions at the beginning of this manual.
This machine represents over 2 years of product development and incorporates many technological advances
offering you years of service without obsolescence.
It is our sincere philosophy that we are partners with our customers and must grow together. With that in mind,
we welcome all comments and suggestions either through your sales representative, our customer service
department or whomever you have contact with from FASTCORP.
Refer to this manual as you become a DIVI merchandiser in vending.
Thank you,
The FASTCORP Team
The newest version of this manual may be downloaded at
http://www.fastcorpvending.com/support or scan the QR code.

Fastcorp DIVI Specifications

General

Brand	Fastcorp
Model	DIVI
Category	Vending machines
Language	English

Summary

Safety and Precautions

Safety Symbols, Cautions, and Meanings

Explains warning and caution symbols used in the manual, including their meanings and associated hazards.

Safety Information

Covers user restrictions, refrigerant hazards, and general operating precautions for safe use.

Important Safety Warnings

Lists critical warnings regarding machine usage, environmental conditions, and essential maintenance.

Sanitation and Food Safety Requirements

Outlines requirements for maintaining hygiene and food safety standards within the vending machine.

Electrical and Power Safety

Details safety precautions and requirements for electrical connections, grounding, and operation.

Grounding the Vendor

Setup and Installation

Quick Start Guide

Provides initial steps for machine setup, including unboxing, leveling, and basic configuration.

Transport and Unpacking Instructions

Machine Installation and Positioning

Machine Power-Up Procedure

Robot and Freezer Operations

Freezer Maintenance

Bin Setup and Plan-O-Gram

Machine Programming Guide

Explains how to enter setup and programming information in Service Mode.

Service Menu Options Overview

Robot Arm Calibration

Provides instructions for calibrating the robot arm to ensure accurate product retrieval.

Robot Control Sequence

Describes the states and sequence of operations for the robot arm during a vend cycle.

Maintenance, Troubleshooting, and Updates

Freezer Defrosting Procedure

Health Sensor Guidelines

Error Recovery Procedures

Firmware Update Instructions