Need help?Do you have a question about the Fastcorp EVOLUTION FS-01 and is the answer not in the manual?
General safety guidelines for operating and servicing the Evolution Vending Machine.
Electrical safety precautions to prevent shock hazards during operation and maintenance.
Details on voltage, cycle, and amperage requirements for the vending machine.
Instructions on proper grounding procedures to ensure electrical safety.
Instructions for removing packaging, skids, and protective barriers from the machine.
Important notes regarding machine placement, leveling, and handling.
Guidelines for placing the machine with adequate ventilation and clearance.
Steps for installing currency systems, card readers, and other MDB peripherals.
How to check the current freezer temperature via the display.
Procedures for adjusting the freezer temperature for standard and extreme cold models.
Step-by-step instructions for defrosting the freezer unit.
Steps to retrieve and resolve error messages, including Health Sensor errors.
Overview of the machine's programming interface and service mode access.
Step-by-step guide to calibrating the robot arm for initial setup.
Instructions for recalibrating the robot arm after upgrades or changes.
Process for clearing all programmed data and sales information from the VMC.
Procedure for changing the prices of programmed selections.
Accessing and viewing total and resettable sales data.
Specifying settings for the currency system, including Force Vend and No Cheat.
Instructions for the proper installation of the robot arm assembly.
General| Brand | Fastcorp |
|---|---|
| Model | EVOLUTION FS-01 |
| Category | Vending machines |
| Language | English |
To Next Page
