-
36
Display Pr
ogramming Instructions
2 BEGIN 12:00AM
*-SAVE #-EXIT
j) Enter the start time for the second
Vend Block or press # to exit.
12) VB PIN CODE - Set or alter the VEND BLOCK option from the outside of the
machine without opening the door by using a PIN code.
Display Programming Instructions
12) VB PIN CODE
*=Next D = Back #=Yes
a) Press the #=Yes key to enter Menu
Option.
VB PIN : #*5678
*-EXIT #-SAVE
b) Vend block pin code is factory set at
#*5678. Use factory setting or type
over four new digits and press the #-
Save key. Type this code when you are
in “Please Insert Money” mode to gain
direct access to VEND BLOCK.
SAVED c) Press # to save the new PIN.
13) HEALTH TIMER - Allows the health sensor to be bypassed for a short time.
Secondary options are display mode (ºF or ºC) and Health control mode. A test
option is available for NAMA and for Health inspector’s use.
*NOTE: Health Timer resets to 0 if power is cycled off and then on, again.
Display Programming Instructions
13) HEALTH TIMER
*=Next D = Back #=Yes
a) Press the #=Yes key to enter Menu
Option.
HEALTH TIMER: 0Hrs
*=Next D=Back #=Yes
b) Press *=Next to scroll from 0 to 4
hours.
HEALTH TIMER: 2hrs
*=Next D=Back #=Yes
c) Press #=Yes to start timer.
DISPLAY FAHRENHEIT
*=Next D=Back #=Yes
d) Press * to select Fahrenheit or
Centigrade. Press # to accept.
NAMA Ice Cream
*=Next D=Back #=Yes
e) Choose Health Control Mode. Press
*=Next to scroll:
• NAMA Ice Cream (Default)
• NAMA Test mode. This does not
change operation mode.
• Frozen Food
• Super-Cold
Then press #=Yes
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
To Next Page
Loading...
