-
37
14
) PROGRAM VERSION - Shows the date and software version installed.
Display Programming Instructions
14) PROGRAM VERSION
*=Next D = Back #=Yes
a) Press the #=Yes key to enter Menu
Option.
FASTCORP GEN 4
UNIVERSAL vX.XXY
b) Program version (X.XX) and revision
(Y) are displayed. Press any key to
continue.
15) DISPLAY LANGUAGE - Allows the programmer to change the language of
all external text and all programming. English, German and Spanish languages
reside in the software. One additional language translation may be added to the
existing software subject to availability.
Display Programming Instructions
15) DISPLAY LANGUAGE
*=Next D = Back #=Yes
a) Press the #=Yes key to enter Menu
Option.
English
*=Next
D=Back
#=Yes
b) Press *=Next to scroll through
language choices. Press #=Yes to
accept.
16) LINE MODE - Line mode shortens the time between vends by holding the
freezer door open between vend cycles. If there is no activity for 20 seconds the
Freezer Lid will close. (Default setting is OFF).
Display Programming Instructions
16) LINE MODE
*=Next D = Back #=Yes
a) Press the #=Yes key to enter Menu
Option.
LINE MODE: ON
*=Next D=Back #=Yes
b) Press the *=Next key to scroll
between options.
c) Press the #=Yes key to confirm the
selection.
17) MACHINE SERIAL NUMBER - Program the serial number of the vendor into
the VMC memory so that an external data retrieval unit (DEX) can include the
serial number when uploading sales information. Up to 10 digits are allowed.
Defaults to VMC Board serial number.
Display Programming Instructions
17) Machine Serial #
*=Next D=Back #=Yes
a) Press the #=Yes key to enter Menu
Option.
SN 0000000000
*-Exit #-Save
b) Enter 10 digit ID number (asset #,
machine serial #, etc.). Press #-Save.
MACHINE SN SAVED c) Save serial number is confirmed.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
To Next Page
Loading...
