Fastcorp EVOLUTION FS-01 - ELECTRIC POWER REQUIREMENTS; GROUND THE VENDOR

-
10
ELECTRIC POWER REQUIREMENTS
The cabinet serial plate indicates the proper Voltage and Amperage required for
the vendor.
EVO MODEL USAGE VOLTAGE CYCLE AMPERAGE
FS01 DOMESTIC - N.A. 115 60 9.7
FS02 INTERNATIONAL 230 50 5.0
The vendor must be plugged into a properly rated single phase, grounded,
alternating current outlet with its own circuit protection (fuse/circuit breaker).
DO NOT USE AN EXTENSION CORD OR POWER STRIP TO SUPPLY
POWER TO THE EVOLUTION MACHINE.
GROUND THE VENDOR
The Evolution Vendor MUST be plugged into a properly grounded outlet. If the
outlet will not accept the power cord plug, contact an electrician to install an
appropriate AC outlet.
DO NOT REMOVE THE GROUND PIN OR IN ANY WAY BYPASS, MODIFY,
DEFEAT, OR DESTROY THE GROUNDING SYSTEM OF THE VENDOR.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY SUBJECT THE
USER TO THE RISK OF INJURY OR ELECTRICAL SHOCK WHICH CAN BE
SERIOUS OR FATAL.
M
achine Dimensions:
HEIGHT 73 - INCHES / 185 CENTIMETERS
WIDTH 41 - INCHES / 104 CENTIMETERS
DEPTH 36 - INCHES / 91 CENTIMETERS
WEIGHT, NET 544 - POUNDS / 247 KILOGRAMS
WEIGHT, GROSS 597 - POUNDS / 271 KILOGRAMS
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200