Fastech Ezi-Step ST User Manual

www.fastech-motions.com - 4
◆ Check the Product
Check the Product is damaged or parts are missing.
Otherwise, the machine may get damaged or the user may get injured.
Attention
◆ Installation
Carefully move the Ezi-STEP ST.
Otherwise the Product may get damaged or User's foot may get injured by dropping the
product.
Use non-flammable materials such as metal in the place where the Ezi-STEP ST is to be
installed.
Otherwise, a fire may occur.
When installing several Ezi-STEP ST in a sealed place, install a cooling fan to keep the
ambient temperature of the Ezi-STEP ST as 50℃ or lower.
Otherwise, a fire or other kinds of accidents may occur due to overheating.
The process of Installation, Connection, Operation, Checking and Repairing should be
done with qualified person.
Otherwise, a fire or other kinds of accidents may occur.
Attention
Warning
◆ Connect Cables
Keep the rated range of lnput Voltage for Ezi-STEP ST.
Otherwise, a fire or other kinds of accidents may occur.
Cable connection should follow the wiring diagram.
Otherwise, a fire or other kinds of accidents may occur.
Before connecting cables, check if input power is off.
Otherwise, an electric shock or a fire may occur.
The case of the Ezi-STEP ST is insulated from the ground of the internal circuit by the
condenser. Ground the Ezi-STEP ST.
Otherwise, an electric shock or a fire may occur.
Attention
Warning

Fastech Ezi-Step ST Specifications

General

Brand	Fastech
Model	Ezi-Step ST
Category	Industrial Equipment
Language	English