www.fastinc.com 1-800-243-9271 229-51319 D © 2007-2010 FAST
10 & 18 Product Cooking Controllers
Programming Custom Product & Action Alarm Names to the Library
13
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
ENTER LIBRARY PRO-
GRAMMING MODE.
Press and hold the P key for 3
seconds.
Type in 3 2 2 8 using the
product keys. Press the P key.
Press the down arrow key.
Press the down arrow key to
select either PRODLIBR OR AL-
RMLIBR.
Choose either PRODLIBR
(Product Library) or ALRMLIBR
(Action Alarm Library) by
pressing the P key.
EXIT LIBRARY PRO-
GRAMMING. Press the up
or down arrow keys until dis-
play reads EXIT.
A flashing dash will be dis-
played. Press the SCAN key
and use the product keys to
spell a new word. Press the
right arrow key to advance to
the next character position.
Continue spelling the word.
When done, press the P key.
Press the P key.
SYSTEM 3228
STORE MANAGER
PROGRAM will be displayed.
Press the P key.
TO SAVE WORD, press P
again. Skip to Exit Library Pro-
gramming.
,
see next step.
TO CANCEL OR MODIFY
WORD, press the left or right
arrow keys to select CANCEL
or MODIFY.
Press the P key to EXIT and
cancel the word.
Press the SCAN key to go
back and modify the word.
IF YOU CHOOSE CANCEL:
IF YOU CHOOSE MODIFY:
You have now EXITED Library
Programming Mode and can
operate the controller.
To Next Page
Loading...
Need help?
General
