FASTRON. MERIDIAN Series User Manual

www.fastinc.com 1-800-243-9271 229-51319 D © 2007-2010 FAST
10 & 18 Product Cooking Controllers
Programming: OFFSET
12
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
ENTER OFFSET PRO-
GRAMMING MODE.
Press and hold the P key for 3
seconds.
Type in 3 2 2 8 using the
product keys. Press the P key.
Press the down arrow key.
Press the down arrow key
UNTIL Offset is displayed.
Press the P key.
Use the product keys to enter
a new offset temperature. to
change from negative to posi-
tive, use the left and right
arrow keys. Press the P key.
Offset Temperature can
be set from
20 to -20F
(-6.6 to -28.8C).
EXIT OFFSET PRO-
GRAMMING MODE.
Press the up or down arrow
keys to scroll to EXIT. Press
the P key.
Press the P key.
SYSTEM 3228
STORE MANAGER
PROGRAM will be displayed.
Press the P key.
You have now EXITED Offset
Programming Mode and can
operate the controller.

FASTRON. MERIDIAN Series Specifications

General

Brand	FASTRON.
Model	MERIDIAN Series
Category	Controller
Language	English