FASTRON. MERIDIAN Series User Manual

www.fastinc.com 1-800-243-9271 229-51319 D © 2007-2010 FAST
10 & 18 Product Cooking Controllers
Programming: PRODUCT KEY
Programming: SYSTEM
10
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
SYSTEM 3228
STORE MANAGER
ENTER SYSTEM PRO-
GRAMMING MODE.
Press and hold the P key for 3
seconds.
Type in 3 2 2 8 using the
product keys. Press the P key.
Press the down arrow key.
Press the P key.
SET APPLIANCE MODE.
Use the left and/or right arrow
keys to choose Gas, Electric or
Generic. Press the P key.
SET HOLD TIME. Actual
hold time will be displayed. To
change, press toggle clear to
change the time to zero. Type
in a new time using the prod-
uct keys. Press the P key.
SET FILTER COUNT.
Actual filter count will be shown
(1-99 or NONE). Use the left and
right arrow keys to set a new fil-
ter count. Press the P key.
EXIT PROGRAMMING
MODE. Press the up arrow
key.
Press the P key.
Either press another product
key to program and repeat the
programming instructions, or
exit by pressing the up arrow
key.
OR
Press the P key. Press the up
arrow key.
Press the P key.
SET ACTION ALARM
NAME. ALMNAME1 will be
displayed, then the actual ac-
tion alarm name. Use the up
and down arrow keys to scroll
through the library. Press the P
key to either go to next action
alarm name, or continue
through programming.
PROGRAM will be displayed.
Press the P key.

FASTRON. MERIDIAN Series Specifications

General

Brand	FASTRON.
Model	MERIDIAN Series
Category	Controller
Language	English