FAURE HERMAN 744-082 - Checking; Equipment Required; Procedure

FAURE-HERMAN
COMPONENT MAINTENANCE MANUAL
744-082 / 744-082-3
28-49-91
PAGE 501/502
MAR 31/07
CHECK
1. CHECKING
A. Equipment required
- None.
B. Procedure
- Check the overall condition of the unit (paint, absence of scores, surface finish).
- Check the condition of screw heads and nuts.
- Check the condition of electrical leads and receptacle connector (connector pins inserted too far
or damaged).
- Check the operation of the various controls (selectors, switches, pushbutton).
The document reference is online, please check the correspondence between the online documentation and the printed version.