FAURE HERMAN 744-082 - Page 85

FAURE-HERMAN
COMPONENT MAINTENANCE MANUAL
744-082 / 744-082-3
28-49-91
INTRO - PAGE 1005
MAR 31/07
E. Units per assembly
The Units per Assy column shows the number of units required for the next higher assembly.
In some cases this information is replaced by the letters REF (reference) or AR (as required).
3. TERMS AND ABBREVIATIONS USED
- AR : As required
- ATTACHING PARTS
- DELECTED
- DET : Detail
- LH and RH : Left and Right
- MADE BY
- MADE FROM
- MATCHED PART
- MODIFIED FROM
- NHA : Next higher assembly
- NP : Not procurable
- OLD PN : Old part number
- OPT TO : Optional parts
- ORDER OVERLGTH MPN : Actual part number exceeding 15 characters
- OVERSIZE : Oversize repair parts
- R : Modified
- REF : For reference
- SAME AS
- SEE
- SEL FROM : Select from parts
- STORAGE PARTS
- SUPSD BY : Superseded by
- SUPSDS : Supersedes
- UNDERSIZE : Undersize repair parts
4. UPDATING
When an item is revised, added or deleted, the letter "R" is shown in the RH margin (the page date of
issue changes).
The document reference is online, please check the correspondence between the online documentation and the printed version.