Need help?Do you have a question about the Fayat Group BOMAG BF 700 C-2 and is the answer not in the manual?
Introduction to the BOMAG service manual, outlining its purpose and target audience.
Key safety information and precautions for operating and maintaining the machine.
Preliminary remarks and safety data sheet information for handling fuels and lubricants.
Safety and environmental regulations for handling diesel fuel, covering fire, health, and slipping hazards.
Safety and environmental regulations for handling oil, covering fire, health, and slipping hazards.
Safety and environmental regulations for hydraulic oil, covering pressure fluid injury, fire, health, and slipping hazards.
Safety and environmental regulations for coolants, covering scalding, health, and slipping hazards.
Safety and environmental regulations for battery acid, covering cauterization and exploding gas mixture hazards.
Instructions for working on hydraulic lines, emphasizing pressure relief and avoiding injury from escaping hydraulic oil.
Safety precautions for engine work, including fuel system, oil drainage, high temperatures, and coolant checks.
Safety guidelines for electrics and battery maintenance, including battery disconnection and short circuit prevention.
Safety warnings for electric heating elements, emphasizing high voltage and hot component hazards.
Precautions for cleaning, including engine running, flammable substances, and protecting electrical parts.
Procedure for safely parking the machine, including brake application and ignition key removal.
Detailed information on engine oil, fuel, coolant, and hydraulic oil specifications and properties.
Details on engine oil quality, viscosity classes (SAE), and oil change intervals.
Guidelines for fuel quality, including preferred diesel specifications and restrictions on additives.
Information on coolant composition, properties, and topping up/replacing procedures.
Specifications for mineral oil and biodegradable hydraulic oils, including viscosity and changeover considerations.
Specifications for synthetic gear oil, including viscosity and viscosity index requirements.
Recommended types of lubrication grease for general purposes, specifying EP-high pressure grease.
Specifications for high-temperature lubrication grease, including EP-high pressure and NLGI classification.
Table listing fuels and lubricants, spare parts numbers, and filling quantities for assembly groups.
Important notes and procedures for hydraulic system repairs, emphasizing cleanliness, pressure relief, and component handling.
Detailed dimensions of the paver machine in millimeters and inches, labeled A, B, H, H2, L, W.
Operating weight (CECE) of the paver with screed, in kilograms and pounds.
Key travel parameters: working speed, travel speed, and maximum permissible ascent.
Engine manufacturer, type, cooling, cylinders, power, and fuel type specifications.
Crawler track specifications, including ground contact area dimensions.
Hopper specifications: capacity, width (open/closed), length, and filling height.
Data for scraper belt and auger: quantity, rated speed, control, and reversing operation.
Conveyor auger specifications: quantity, width, rated speed, and reversing operation.
Screed technical data: working widths, paving width, mat height, plate depth/thickness, heating, tamper/vibration frequency.
Filling capacities for fuel (diesel) in liters and US gallons.
Travel pump specifications: manufacturer, type, system, displacement, pumping delivery, and pressure limits.
Scraper belt pump specifications: manufacturer, type, displacement, pumping delivery, and pressure limits.
Auger drive pump specifications: manufacturer, type, displacement, pumping delivery, and pressure limits.
Working pump specifications: manufacturer, type, displacement, pressures, and maximum speed.
Fan pump specifications: system, displacement, pumping delivery, pressures, and maximum speed.
Identification of key electrical components and systems, including control units, relays, and sockets.
Detailed overview and identification of switches and controls located on the machine's dashboard.
Identification and description of switches and controls on the external operator stations, left and right.
Overview of the screed control panel, detailing switches, gauges, and operational functions.
Diagrams illustrating the machine's wiring looms and their connections to various components.
General| Engine Power | 129 kW |
|---|---|
| Max. Operating Depth | Not applicable |
| Transport width | 2.55 m |
| Centrifugal Force | Not applicable |
| Drum Width | Not applicable |
| Drum Diameter | Not applicable |
| Vibration Frequency | Not applicable |
To Next Page