Fayat Dynapac F80W - User Manual

F80W, Hatz
www.dynapac.com
OPERATING MANUAL
OPERATING MANUAL
Asphalt paver wheeled
F80W
Hatz
4812217930

Summary

Specification Manual

Basic Data

Provides fundamental information about the asphalt paver, including machine type, serial numbers, and manufacturer details.

Technical Data

Details the technical specifications of the machine, including weight, driving characteristics, engine, axle, and brakes.

Specification Table

Lists detailed technical specifications like operating fluids, hopper capacity, paving dimensions, electricals, and noise emissions.

Optional Equipment

Details available optional equipment for the machine, such as screed vibration units and mechanical extensions.

Table of Optional Equipment

Lists optional equipment with their corresponding chapter references and order numbers for easy selection.

Operating Manual

Main Safety Precautions

Covers essential safety rules and obligations for operators and owners before, during, and after machine operation.

Obligations Before Putting into Operation

Outlines mandatory steps and knowledge requirements for operators before starting machine work.

Dangerous Zone and Safe Distance

Defines the hazardous area around the machine and required safe distances for personnel.

Personal Protective Equipment

Specifies the mandatory personal protective equipment (PPE) for operators and maintenance personnel.

Operation of the Machine

Provides instructions for the basic operation, controls, and functions of the asphalt paver.

Starting the Engine

Details the step-by-step procedure for safely starting the machine's engine.

Travel and Reversing of the Machine

Explains how to operate the machine for forward and backward travel in transport and operating modes.

Stopping the Machine and Engine

Describes the correct procedures for stopping the machine and shutting down the engine safely.

Operation of the Screed

Covers the operation, adjustment, and settings for the machine's screed unit.

Setting the Paving Width

Details the procedure for adjusting the paving width using the machine's controls.

Setting the Paving Thickness

Explains how to set the desired paving thickness by adjusting the screed's pitch angle.

Screed Gas Heating

Provides instructions for operating and safety precautions related to the screed's gas heating system.

Machine Transport

Covers procedures and safety regulations for transporting the machine.

Preparation of the Machine for Transport

Outlines the necessary steps to prepare the machine for safe transport according to regulations.

Loading the Machine Using a Ramp

Details the procedure and safety measures for loading the machine onto a transport vehicle using a ramp.

Special Conditions to Use the Machine

Addresses specific operating conditions, including environmental factors and towing.

Towing the Machine

Provides instructions and safety warnings for towing the machine.

Maintenance Manual

Safety and Other Measures During Maintenance of the Machine

Covers general safety precautions and measures to be followed during machine maintenance.

Safety Precautions During Machine Maintenance

Details critical safety rules to be observed when performing maintenance tasks on the machine.

Environmental and Hygienic Principles

Highlights health protection and environmental principles related to machine operation and maintenance.

Specification of Operating Fluids

Lists the types and specifications of operating fluids required for the machine's maintenance.

Engine Oil

Specifies the performance classification, viscosity, and type of engine oil required for the machine.

Hydraulic Oil

Details the required grades and viscosity of hydraulic oil for the machine's hydraulic system.

Lubrication and Maintenance Operations

Provides detailed procedures for routine lubrication and maintenance tasks based on operating hours.

Every 10 Hours at the Beginning of Work (Daily)

Outlines daily maintenance checks and tasks to be performed at the start of operations.

Engine Oil Check

Details the procedure for checking the engine oil level and ensuring it is within the correct range.

Every 250 Hours of Operation (Every 3 Months)

Specifies the maintenance tasks required every 250 operating hours or three months.

Engine Oil Replacement

Provides instructions for changing the engine oil and filter.

Battery Check

Explains how to perform a battery check, including voltage measurement and charging.

Every 500 Hours of Operation (Every 6 Months)

Outlines the maintenance tasks required every 500 operating hours or six months.

Fuel Filter Replacement

Details the procedure for replacing the fuel filter.

Air Filter Replacement

Provides instructions for replacing the air filter.

Hydraulic Oil and Hydraulic Oil Filter Replacement

Describes the process for changing the hydraulic oil and replacing the oil filter.

Maintenance as Required

Covers maintenance tasks that are performed based on specific needs or conditions.

Screw Connections Tightness Check

Explains the procedure for checking and tightening screw connections using a torque spanner.

Troubleshooting

Provides guidance on identifying and resolving common faults and errors.

Troubleshooting Engine Faults When Indicator Lamps Are Lit on the Display

Helps diagnose engine issues indicated by warning lamps on the display.

Troubleshooting the Hydraulic System

Guides on diagnosing and fixing problems within the machine's hydraulic system.

List of Error Codes Displayed on the Display

Provides a reference for error codes shown on the machine's display and their potential causes.

Appendices

Contains supplementary information, including diagrams and tables for reference.

Machine Wiring Diagram

Illustrates the electrical connections and components of the machine's wiring system.

Machine Hydraulic System Diagram

Presents a schematic diagram of the machine's hydraulic system.

Measuring Points of the Hydraulic Circuit

Identifies specific points on the hydraulic circuit for pressure measurements.

Table of Spare Parts for Regular Maintenance

Lists common spare parts required for regular maintenance, along with their order numbers.

Table of Optional Equipment

Summarizes optional equipment available for the machine and their order numbers.

Fayat Dynapac F80W Specifications

General

Brand	Fayat
Model	Dynapac F80W
Category	Construction Equipment
Language	English