Need help?Do you have a question about the FBII XL-20 and is the answer not in the manual?
General| Brand | FBII |
|---|---|
| Model | XL-20 |
| Category | Security System |
| Language | English |
Instructions for arming the security system in various modes.
Steps to turn off the security system.
Arming the system for perimeter protection while staying inside.
Arming with perimeter sensors active and interior zones instant.
Procedure to reset smoke detectors on the system.
Understanding zone status indicators for alarms, bypasses, troubles, and faults.
Indicator for system armed/disarmed status and alarm conditions.
Indicates system armed in STAY or STAY/INSTANT mode.
Indicates system armed in STAY/INSTANT mode.
Indicates panel power: AC presence or battery backup.
Indicates system readiness for arming.
Arms system excluding interior zones for exterior protection.
Temporarily excludes a zone of protection.
Enables arming without entry/exit delays.
Used for installer programming and user code entry.
Initiates alerts for PANIC, AUXILIARY, FIRE.
Indicates RF transmitter low battery condition.
Indicates RF supervisory conditions like no check-in or tamper.
Procedure to arm the system and exit the premises.
Explains conditions when the system is not ready to arm.
Steps to arm the system when it is not ready, including bypassing.
Arming the system for perimeter protection while staying inside.
Arming with perimeter sensors active and interior zones instant.
Arming all zones in instant mode, eliminating all entry/exit delays.
Excludes a zone of protection until unbypassed or system disarmed.
Returns a bypassed zone to normal operation.
Procedure to add or modify user codes on the system.
Procedure to remove a user code from the system.
Setting up a code that can only arm the system, not disarm.
Keypad combinations for sending Fire, Panic, or Auxiliary alerts.
Feature to send a silent duress signal to the Central Station.
Allows quick arming and bypassing of zones without user codes.
Procedure to set the system's current time and date.
Enables or disables keypad chime for door openings.
Procedure for weekly testing of the security system's functionality.
Procedure for monthly testing of the system's backup battery.
Diagram and guidelines for smoke detector placement.
Steps for creating and practicing a fire emergency evacuation plan.
Discusses factors affecting system performance and protection.
Compliance statement regarding radio frequency energy.
Troubleshooting tips for telephone line issues with the system.
To Next Page
