Febo Flame ZHS-32-D - Page 7

PAGE 7 OF 10
OPERATING INSTRUCTIONS
Flame Control (Figure 4. B):
✦ The FLAME button controls the flame feature and the ember effect ON and OFF.
✦ When you press the FLAME button to be ON mode, the intensity of the flame will be dimming on from
LOW to HIGH in 3 seconds. When you press the FLAME button again in OFF mode, the flame will be
dimming off from HIGH to LOW in 8 seconds.
✦ The default setting of the flame is highest flame setting, Press UP(G) or DOWN(F) button, you can adjust
the flame brightness, there are 5 levels of the brightness.
✦ When operating this button, the Display Screen FLAME icon will be twinkling (See Figure 4.B),
✦ When you are adjusting the flame brightness with UP(G) and DOWN(F) button, the Display Screen will
show corresponding brightness level base on wave number (See Figure 4.F)
Heater Control (Figure 4.C):
✦ The HEATER button controls the heat ON and OFF feature, It can be used to switch the temperature
reading on the Display Screen.
✦ The default setting of the heating feature is highest temperature 95F(35C).
✦
There are total 7 adjustable levels from highest to lowest, when the fireplace is first turned on the
HEATER will come at the highest temperature 95F/35C, and the lowest temperature is 65F/18C. Press
UP and DOWN button to adjust the heater level, 5F/3C each press.
✦
When adjusting the flame brightness with UP and DOWN button,thedisplayscreenwilldisplaytheheater
settinginusingaccordinglywitheitherFahrenheit(F)orCelsiusdegrees(C).Withoutfurtheroperations,
thedisplayscreendisplayroomtemperatureafteraround6seconds. (See Figure 4.A)
✦
OnceturnofftheHEATER,theblowerwillexhaustaircoolingfor30secondsbeforeshutoff.
Timer Control (Figure 5.D):
✦
This button controls the TIMER on/off.
✦
When operating this button, display screen TIMER icon twinkle (See Figure 4.D).
✦
Press UP and DOWN button to adjust the timer form 0.5 to 8H, 0.5 hour each press. Thedisplayscreen
willdisplaythetimersettinginusingaccordingly(See Figure 4.A).
✦
OnceTIMERisset,thewholecontrolsystemwillbeshutoffafterthetimewasset.Duringthistime,the
otherfunctionsstillcanbeoperated.
Child Lock (Figure 3.E):
✦
PresstheCHILDLOCKoncetoactivatethechild-lockfunction,oncethisfunctionisactivated,allthe
otherbuttonsbelocked,thedisplayscreenCHILDLOCKicondisplay locked(SeeFigure4.E).
✦
PresstheCHILDLOCKbuttonfor6secondsagaintounlockthecontrolsystem,andtheotherbuttons
canbeoperatedagain,thedisplayscreenCHILDLOCKicondisplay unlock(SeeFigure4.G).
DOWN(Figure 5.F):
✦
Coordinating with FLAME / HEATER / TIMER button, use this DOWN button to decrease.
✦
Without press FLAME / HEATER / TIMER button, press this button for the function of
F
LAME
.
✦
When FLAME / HEATER / TIMER is not activated, this button will not work.
Up (Figure 5.G):
✦
Coordinating with FLAME / HEATER / TIMER button, use this UP button to increase.
✦
Without press FLAME / HEATER / TIMER button, press this button for the function of
F
LAME
.
✦
When FLAME / HEATER / TIMER is not activated, this button will not work.
ITEM# 384-15A-20-33A
MODEL# 16IN-32-110