FedEx ZP505 - Install Printer Driver; Remove Legacy Zebra Driver; Install ZP 505 Driver (Plug and Play)

ZP 505 Thermal Printer
Quick Installation Guide 5
Step 5: Install the Printer Driver
If you previously installed a thermal printer with FedEx Ship
Manager at fedex.com or FedEx Ship Manager Software,
follow the Remove Legacy Zebra Printer Driver procedure
first.
Then follow the appropriate Install ZP 505 Thermal Printer
Driver procedure for plug and play or no plug and play. If you
do not need to remove the legacy Zebra printer driver,
proceed to the appropriate Install ZP 505 Thermal Printer
Driver procedure.
If you are using Microsoft® Windows® 7 (32-bit and 64-
bit) operating systems, you must install the designated
Zebra printer driver designed for those operating
systems. Refer to the Printer Support Guide for current
installation procedures.
Remove Legacy Zebra Printer Driver
1. Insert the Zebra
®
ZP 505 and Z4Mplus DT
™
FedEx Shipping
System Printers Mini-CD into your CD drive. If the Autoplay
screen displays, double-click Run RunCD.exe . The Zebra
Printers for FedEx Shipping Applications screen displays.
2. Click the ZP 505 icon. The ZP 505 installation screen
displays.
3. In the Software and Maintenance section, click Install
Windows Driver Suite
. The Chilkat Zip Self-Extractor
popup displays.
4. Rename the current directory (c:\temp) to C:\Zebra .
5. Click Unzip . The Zebra Printer Driver Installation popup
displays.
6. Click Remove All Zebra Printers and then click OK when
the “Are you sure?” popup displays. This removes all
installed Zebra and Eltron printers.
7. When the printer removal process finishes, click Close to close the
Chilkat Zip Self-Extractor popup.
8. Close the Zebra Printers for FedEx Shipping Applications screen.
9. When you have completed this process, reboot your computer.
When it restarts, the Zebra Printers for FedEx Shipping
Applications screen displays, so you can install the ZP 505
thermal printer driver.
Note: If the Zebra Printers for FedEx Shipping Applications screen does not
display, navigate to the CD drive and double-click the
Setup.exe file. The
Zebra Printers for FedEx Shipping Applications screen displays.
Install ZP 505 Thermal Printer Driver (for Plug and Play)
1. Insert the Zebra ZP 505 and Z4Mplus DT FedEx Shipping System
Printers Mini-CD into your CD drive. If the Autoplay screen
displays, double-click Run RunCD.exe. The Zebra Printers for
FedEx Shipping Applications screen displays.
2. Click the ZP 505 icon. The ZP 505 installation screen displays.
3. In the Software and Maintenance section, click Install
Windows Driver Suite
. The Chilkat Zip Self-Extractor
popup displays.