Quick Installation Guide 8
Step 6: Complete Setup
Now that you have installed the ZP 505 thermal print
driver, follow the procedure below to complete the
setup of your thermal printer driver with the
appropriate FedEx Ship Manager® solution.
If you are using FedEx Ship Manager at fedex.com:
1.
Log in to FedEx Ship Manager at fedex.com. (Go to
fedex.com
, place your cursor over the
Ship
tab and select
Create Shipment from the drop-down menu.
The fedex.com Login screen displays.)
2.
Click Preferences at the top of the screen.
3.
In the Printer and Scale Options area of the Preferences screen,
click the
Thermal Printer
radio button or click
Set up thermal
printer
. The Thermal printer setup instructions screen displays.
Note: If the Thermal printer setup instructions screen displays for the LP 2844
thermal printer, select
ZP 500
from the Select thermal printer drop-down menu
in
Step 1.
4.
Click
Done
, and then click
Save/Update
on the Preferences
screen to save the ZP 500 printer as the default printer.
5.
On the Preferences screen, click the
Thermal Printer
radio
button or click Set Up Thermal Printing.
6.
Click
Print Test Message
in step 5 of the online instructions
to make sure the printer is properly set up.
7.
Once you’ve completed the procedure, click
Done
, and then
click Save/Update on the Preferences screen.
If you intend to use FedEx Ship Manager Software but you
have not installed the software yet, insert the FedEx Ship
Manager Software CD and follow the installation procedure.
If you are using FedEx Ship Manager Software and
have already installed the software:
1.
Launch FedEx Ship Manager Software.
2.
From the tool bar, click Customize and select
System Settings.
3.
Select the appropriate system number and click Modify.
4.
Select the 2 — FedEx Customer Admin tab.
5.
At the bottom of the screen in the section labeled Set Default
Printers, click the
Browse
button next to the Label Printer
field. Select the ZP 500 thermal printer you just installed,
such as Zebra ZP 500 (ZPL), and click OK.
6.
Click
OK
to exit System Settings. To verify that the printer is
properly configured, click
Utilities
from the tool bar and select
Printer Setup
. The label printer you just installed should
display in the Label Printer section. If not, select the label
printer from the drop-down menu. Click
Test Printer
and then
click
OK
.
Now you can begin printing using your ZP 505 Thermal
Printer. Thank you for choosing FedEx.
To Previous Page
Loading...