FeelTech FY3200S-24M - Parameter Adjustment; Amplitude Adjustment

FeelTech
FY3200S Series User’s Manual 8
Subsidiary output of waveform is narrow pulse.
Subsidiary output of waveform is white Gaussian
noise.
Subsidiary output of waveform is amplitude
modulated wave.
Subsidiary output of waveform is
frequency-modulated wave.
Subsidiary output of waveform is
Arbitrary wave 1.
Subsidiary output of waveform is
Arbitrary wave 2.
Subsidiary output of waveform is
Arbitrary wave 3.
Subsidiary output of waveform is
Arbitrary wave 4.
4、Amplitude adjustment
In chosen main and subsidiary waveform interface, press 【PARM】button to make the cursor point
to the value of amplitude （AMPL=）. The value (Vpp) is peak value of the signal. Use【】and【】
buttons and 【ADJ】knob to change the value. As follows:
S
F=002
1
.00000
k
Hz
AMPL=05.00V ARB1
S
F=002
1
.00000
k
Hz
AMPL=05.00V ARB2
S
F=002
1
.00000
k
Hz
AMPL=05.00V
ARB3
S
F=002
1
.00000
k
Hz
AMPL=05.00V ARB
4
M
F=0021.00000
k
Hz
AMPL=0
5
.00V
TRGL
S
F=002
1
.00000
k
Hz
AMPL=05.00V
PRE7
S
F
=002
1
.00000
k
Hz
AMPL=05.00V
PRE8
S
F=002
1
.00000
k
Hz
AMPL=05.00V
PRE9
S
F=002
1
.00000
k
Hz
AMPL=05.00V
PRE10