(3) DC OUT 8.4V: DC power output interface, polarity as the output
power
Barrel output for powering your camera with a separately
available DC coupler via adaptor (NP-FW50 Sony & LP-E6
Canon&DMW-BLF19 Panasonic). More adapters coming soon.
1.4 Mount Points
There are (3) ¼-20 thread points (bottom, right & left) can be easily
connected to the hot shoe mount, tripod fixed installation.
Tilt Arm Mounting
The monitor secures to your camera using the included Tilt Arm via
shoe mount or 1/4"-20 thread. The Tilt Arm enables 360° of tilt for
convenient monitoring at nearly any angle. A cold shoe on the Tilt
Arm lets you secure equipment (like a microphone, LED light, or
To Next Page
