Instruction Manual Radar Motion Detector MWD BP 5/13
Manual MWD BP.doc as 07/21/2006 FEIG ELECTRONIC GmbH
2 Installation
2.1 Place of installation
The device is centrally mounted above the area to be monitored. Both wall- and ceiling mounting are possible. The
maximum mounting height is 7m.
2.2 Hints for planning and installation:
• The device has to be mounted vibrationless.
• In order to avoid incorrect release, there must not be any objects in motion within the radiation field.
• There must not be any fluorescent tubes within the radiation field of the detector.
• It should be avoided that the radiation fields of two motion detectors overlap, since this may lead to incorrect
releases.
• Do not install behind objects, building coverings or elements.
• If the motion detector is exposed to rain or snow, it should be adjusted to directional recognition.
• If conductive floors are used and the radiation direction is almost vertical, incorrect releases may be caused
by reflections.
To Next Page
Loading...